Pipefitter

Offsets, take-outs and tape maths for pipefitters and steamfitters.

For iPhone · In development, not on the App Store yet

A fast, offline iPhone calculator that works in feet, inches and fractions. Results update as you type, and every result shows its working, so you can check it against your own numbers.

Screenshots

  1. Pipefitter home screen listing rolling offset, simple offset, fraction calculator, take-out lookup and cut list.
    Every calculator, one tap away
  2. Rolling offset screen: a 3D diagram of a 12 inch set and 8 inch roll, with a cut length of 12 5/8 inches and the working below.
    Rolling offset to cut length
  3. Simple offset screen: a 12 inch set at 45 degrees gives a 17 inch travel and a cut length of 9 1/4 inches.
    Simple offset from any two values
  4. Take-out lookup screen showing 90 and 45 degree elbow take-outs for 6 inch pipe and a table of all sizes.
    Take-outs by pipe size
  5. Fraction calculator adding and subtracting feet, inches and fractions to a total of 13 feet 10 15/16 inches.
    Tape maths in feet and inches
  6. Cut list with four saved cuts, each with its inputs and cut length.
    A cut list that keeps the working

Screenshots from the current prototype. Reference values shown in the app are sample data.

What it does